Control Unit WUC 192 0101 with 10 Motor Outputs

WindowMaster WUC 192 0101 – 24 V DC Control Unit with 10 Motor Outputs

This item comes from older remaining stock; the model has been out of production for many years and is only available in limited quantities.

The WindowMaster WUC 192 0101 is a control unit for operating electric WindowMaster window and locking actuators. It features ten independent motor outputs rated at 3 A each, which can be controlled individually or together. This allows multiple window groups to be opened and closed from a central unit.

In addition to manual operation using connected switches, the WUC 192 supports automatic control through suitable sensors. Three priority levels coordinate common commands, individual manual operation and individual automatic control:

• Priority 1: Common opening and closing of all ten outputs.
• Priority 2: Individual manual operation of each motor output.
• Priority 3: Individual automatic control through sensors.

An additional 24 V DC supply connection rated at a maximum of 0.5 A is available for suitable sensors. The controller is housed in a grey painted steel enclosure.

Technical specifications

• Model: WUC 192 0101
• Mains supply: 230 V AC ±10%, 50 Hz
• Input power rating stated in the datasheet: 300 VA
• Output voltage: 24 V DC
• Motor outputs: 10, rated at 3 A each
• Operation: individual or common, with open/close function
• Sensor supply: 24 V DC, maximum 0.5 A
• Enclosure: painted steel
• Colour: grey, RAL 7040
• Dimensions: 580 × 365 × 110 mm (W × H × D)
• Weight: 10.5 kg
• Maximum ambient temperature: 50°C

Compatibility

The manufacturer's datasheet lists WindowMaster WLA sensors, WMU and WMX window actuators, and WMB locking actuators. The permitted number of actuators per output depends on the actuator model and version. For example, the datasheet specifies one WMU 120 or up to three WMX 802/810/820 actuators per channel.

Before purchasing, please check the exact actuator designation and existing system configuration against the datasheet. Compatibility information applies to the product versions listed in that historical document. Installation must be carried out by a qualified electrician.